Home/Roof Insulation Products

Roof Insulation Products

Roof insulation products are essential construction components in supporting changing legislation which is placing higher demands on the thermal performance of a building envelope to reduce energy losses in both heating and cooling cycles. Acoustic and thermal properties of insulation can significantly improve occupant comfort. Roofing insulation products should also be able to withstand loads, such as foot and vehicle traffic, when used for podium, green and ballasted roofs.

Commonly used insulation materials include polyurethane foam (PIR), stone wool, expanded polystyrene (EPS), extruded polystyrene (XPS), vacuum insulated panels (VIP). Insulation materials, including boards, angle fillets and stop battens can be used for all types of flat and pitched roofs as well as metal and inverted roofs. With a suitable air vapour control layer (AVCL) they can applied over most substrates, including profiled metal decks, timber panels or screeded concrete.

Roof insulation boards are available at various compressive strengths that impact their high dimensional stability and the length of service life without the loss of insulation properties. Insulation boards also have differing thermal conductivity. Low lambda values mean better thermal performance can be achieved whilst using less insulation. For best performance, it is important that compatibility of the insulation with the waterproofing system is taken into consideration, where the application requires it.

When selecting insulation boards, lightweight boards can provide ease of transportation and handling for the installing contractors.

What are the benefits of roof insulation products?

 

  • Improving occupant thermal and acoustic comfort
  • Low thermal conductivity means reduced energy losses and improved building performance
  • High compressive strength for application on roofs that are designed for pedestrian of vehicular traffic
  • Lightweight for easier handling and installation
  • Some insulation boards are resistant to water absorption or waterproof and water vapour permeable

IKO products are manufactured in the UK from responsibly, and where possible, locally sourced materials in order to reduce our carbon footprint and help with the sustainability of your project.

Why Choose IKO?
  • Specialist Technical Support

  • UK Manufactured Products

  • Full System Guarantee

  • Family Owned

IKO enertherm ALU Insulation Angle Fillet

    Key Benefits to your project
    • BBA approved (Certificate No. 15/5283)

    • Adhered

    IKO enertherm ALU Insulation Board

      Key Benefits to your project
      • Multi-functional PIR insulation board

      • Covered with a multi-layer gas-tight aluminium construction on both sides

      • Top quality multi layer lamination

      IKO enertherm ALU Insulation Tapered Drainer Board

        Key Benefits to your project
        • Board thickness – 80mm-100mm

        • Provide falls in one direction to a gutter or level valley or in two…

        • Multi-functional PIR insulation board

        IKO enertherm ALU SP Insulation Board

          Key Benefits to your project
          • Multi-functional rebated edge PIR insulation board

          • Covered with a multi-layer gas-tight aluminium construction on both sides

          • Top quality multi layer lamination

          IKO enertherm BGF Insulation Board

            Key Benefits to your project
            • Polypropylene-covered bitumen sand free glass coated on both sides

            • Ideal for the application of torch-applied bituminous roofing

            • Top quality multi layer lamination

            IKO enertherm BM Insulation Board

              Key Benefits to your project
              • Polypropylene-covered bitumen sand free glass coated on both sides

              • Ideal for the application of single-ply membranes and the installation of torch-on bituminous membranes…

              • Top Quality Multi Layer Lamination

              IKO enertherm GOLD Insulation Board

                Key Benefits to your project
                • Retain their shape and dimensional stability longer than standard PIR insulation boards with a…

                • Lower lambda values than the average PIR insulation boards on the market, meaning you…

                • UK Class 1 fire rating ヨ a low to zero smoke emission rate and…

                IKO enertherm Insulated Hard Edge

                  Key Benefits to your project
                  • Factory engineered to precise tolerances

                  • Available in a range of thicknesses

                  • Easy to fix to a variety of roofing decks (bonded or mechanically fixed)

                  IKO enertherm Insulation Universal Angle Fillet

                    Key Benefits to your project
                    • Lightweight and easy to use

                    • Fixed by hot bitumen, cold adhesive or mechanically

                    • Tough protection board facing with dimensionally stable

                    IKO enertherm KR ALU Insulation Board

                      Key Benefits to your project
                      • Overprinted grid reference to assist with the installation of underfloor heating

                      • Covered with a multi-layer gas-tight aluminium construction on both sides

                      • Top quality multi layer lamination

                      IKO enertherm MG Insulation Board

                        Key Benefits to your project
                        • Coated glass PIR insulation board

                        • Bituminous membrane, single-ply and mastic asphalt systems compatible

                        • Top quality multi layer lamination

                        IKO enertherm MG Tapered Insulation Drainer Board

                          Key Benefits to your project
                          • Board thickness – 80mm-100mm

                          • Provide falls in one direction to a gutter or level valley or in two…

                          • Coated glass PIR insulation board

                          IKO enertherm TG ALU Insulation Board

                            Key Benefits to your project
                            • Multi-functional tongue and groove PIR insulation board

                            • Covered with a multi-layer gas-tight aluminium construction on both sides

                            • Top quality multi layer lamination

                            IKO enertherm XPS Insulation Board

                              Key Benefits to your project
                              • Excellent thermal performance

                              • High compressive strength

                              • Highly resistant to water absorption

                              IKO enertherm XPS Insulation Upstand

                                Key Benefits to your project
                                • Weather resistant facing

                                • Solves many design problems

                                • Excellent thermal performance

                                IKO EPS 200 E Insulation Board

                                  Key Benefits to your project
                                  • 200 E grade is A+ rated in the BRE Green Guide

                                  • Specify to 1mm increments to precisely achieve thermal performance

                                  • Designed with 15mm overlap to prevent board uplift during installation

                                  IKO EPS 300 E Insulation Board

                                    Key Benefits to your project
                                    • 300 E grade is A rated in the BRE Green Guide

                                    • Specify to 1mm increments to precisely achieve thermal performance

                                    • Designed with 15mm overlap to prevent board uplift during installation

                                    IKO EPS HP 200 Insulation Board

                                      Key Benefits to your project
                                      • HP 200 Grade offers better thermal performance than the 200 and 300 Grade board…

                                      • Specify to 1mm increments to precisely achieve thermal performance

                                      • Designed with 15mm overlap to prevent board uplift during installation

                                      IKO MW Multi-fix Insulation Board

                                        Key Benefits to your project
                                        • Fleece faced board, compatible with multiple roofing systems

                                        • Low thermal conductivity

                                        • Easy to install, one piece facing insulation solution

                                        IKO MW Upstand Insulation Board

                                          Key Benefits to your project
                                          • Integral weather resistant facing

                                          • Low thermal conductivity

                                          • Easy to install one-piece facing and insulation solution

                                          IKO VIP (Vacuum Insulation Panel) Insulation Board

                                            Key Benefits to your project
                                            • Optimum performance rigid vacuum insulation panel

                                            • Comes with a pre-bonded protective layer underneath offering superior product protection and helping to…

                                            • Insulating performance up to five times better than other commonly available insulation materials

                                            IKO WCL (for EPS)

                                              Key Benefits to your project
                                              • Improves the thermal performance of inverted roofs

                                              • Waterproof and water vapour permeable

                                              • Enables thinner insulation and less ballast to be used

                                              IKO WCL (for XPS)

                                                Key Benefits to your project
                                                • Improves the thermal performance of inverted and green roofs

                                                • Waterproof and water vapour permeable

                                                • Enables thinner insulation and less ballast to be used

                                                About IKOAbout IKOGet Project SupportGet Project SupportRequest a CallbackRequest a Callback
                                                We use cookies in order to give you the best possible experience on our website. By continuing to use this site, you agree to our use of cookies and our Privacy Policy.
                                                Accept